Installations

An Italian manufacturer of industrial waste suction equipment installed a dedusting system in a large corrugated packaging plant. The installation took place without stopping production

The year 1997 is considered a key milestone in the evolution of Probas, now a large-scale converter of corrugated cardboard located in Světlá, Czech Republic, as this was the year when the first BOBST inline die-cutting machine was purchased

...is launched at the SCA plant in Obbola (Sweden). The capacity of the 10200 mm Voith XcelLine is 725 thousand tons of kraftliner per year at a design speed of 1.4 thousand m/min

...has been operating for half a year at Royal Containers, the largest Canadian manufacturer of corrugated packaging

A corrugated board converter based in Belfast, Northern Ireland, has aquired an American Baysek flatbed die cutter for its nick-free, multiple-out die cuts, versatility and one-person operation

“Our traditional model was focused on large organisations requiring large quantities of boxes. Nozomi 14000 LED lets us to enter new markets with short-run orders, increase profitability, provide higher print quality on boxes,” says company's CEO Tamer Hozayen

The new 1000 x 2500 mm FFG LMC P1025 has two vacuum transfer sections and two ColorDry XL3000 infrared dryers. Maximum productivity: 300 blanks per minute. Advanced automatic chamber cleaning system only takes 5-15 minutes for compete cleaning

The four color casemaker at the Klingele plant in Delmenhorst has been installed in line with the original MHI MPF-M prefeeder, ensuring stable operation of the machine at maximum productivity

In March 2021, Luca Lazzaroni, owner of Italy's Icierre Pack Srl, signed a contract for a new BW Papersystems rotary die-cutter without much scrutiny, just after an online video demonstration

This is the fifth project successfully implemented on the site over the past few years by the Italian company jointly with its official partner in the CIS, Gofromashiny

TCY 5PAB-UFGT automatic high speed rotary die cutting line with four printing units has become the most suitable option for the plant, seeking to boost output, quality and range of its products. https://youtu.be/SqVk_Nf8Mns “Our plant needed a universal machine capable...

This summer, GOTEK-Center company (Novomoskovsk, Tula region, Russia) replaced its 10-year-old Mosca MCB-2 strapping machine operating with a Martin 618 inline with a same new one.

“We have supplied two EXPERTLINE 1.6 super-inlines (pre-feeders, flatbed die-cutters, breakers and a palletizer) to Pavlovsky Posad Corrugated Cardboard Plant and SFT Group in Aleksin,” says Gleb Gazukin, CEO of BOBST CIS. “Pavlovsky Posad also aquired a MASTERFOLD 170А4 folder-gluer”.

TCY single facers, roll stands, midline with three print units and WSA peripheral equipment, and Techgene automatic baling press gave the Uzbek plant a powerful impetus to strengthen its market positions.

TCY single facers, roll stands, midline with three print units and WSA peripheral equipment, and Techgene automatic baling press gave the Uzbek plant a powerful impetus to strengthen its market positions.

Four inks, bottom print, vacuum transfer, 4-shaft slotter, top rotary diecutting, folding gluing section with enlarged counter ejector specially designed for large containers.

Yuri Yurchenko, CEO of GofropakTyumen Plant, tells about the twists and turns of corrugated board production and his new 6PAB-STK rotary die-cutting line that has increased the enterprise productivity.

In 2020, more and more cardboard manufacturers of post-Soviet market have chosen Japanese inlines

After an emergency this summer, the company redistributed its capacities and continues to produce corrugated packaging.

This is a fully servo-driven line producing up to 25,800 boxes per hour from blanks of maximum size of 660×1800 mm. Order change takes only 2 minutes